should be used for intake. The delivery of
the water intake tap should be equal to the
double of the maximum pump range.
- Maximum intake water temperature: 40°C
- Max inlet water pressure: 1Mpa
Place the machine as close to the water supply
system as possible.
Failure to comply with the above conditions
causes serious mechanical damage to the
pump and the loss of warranty cover.
Water supply from the water tank build-in
- Switch off the unit.
•
WARNING:
Never use distilled water! The
machine may not run correctly.
> ELECTRICITY SUPPLY
- The appliance’s electrical connection must
comply with the IEC 60364-1 standard.
IMPORTANT: Before connecting the
appliance, make sure that the nameplate
data are the same as those of the electrical
mains and that the socket is protected by a
differential security breaker with tripping
sensitivity below 0.03 A - 30 ms.
- If the appliance’s plug is not compatible with
the socket, have the socket replaced with
another of suitable type by professionally
qualified staff.
- Never use the appliance in ambient
temperatures below 0° C if it is equipped
with a PVC (H VV-F) cable.
•
XY WARNING: Inadequate extension cords
can be dangerous.
•
XJ WARNING: If an extension cord is used,
the plug and socket must be of watertight
construction.
Information for supply may also be obtained
from the plug manufacturer.
230-240V
400-415V
3G 2,5 mm2
4G 2,5 mm2
max 20 m
max 30 m
USAGE
> UNPACKING
Remove the upper and the lower hooks retaining
the cardboard box to the pallet, take the cardboard
box off, place two wheels of the machine on ground
and withdraw the pallet.
> Machine handling and transport
- Always use the handle supplied to move the ma-
chine.
•
WARNINGS Never move the machine by using
the power cable or
steam hose.
> MACHINE DESCRIPTION
see fig.
A
①
Detergent tank
②
Handle
③
Steam gun connection plug
④
Electric cable
⑤
Water inlet
⑥
Diesel tank
⑦
Water tank
⑲
Switch detergent
device
see fig.
D
⑧
dry steam / wet steam adjuster
⑨
Pressure gauge
⑩
Main switch ON/OFF
⑪
Boiler switch
⑫ +
temperature adjuster
⑬
- temperature adjuster
⑭
Thermo regulator display
see fig.
A
⑮
Steam gun + hose
⑯
Accessory
⑰
Detergent spray switch
see fig.
E
⑱
inverter swich (mod. 12V)
⑱
battery pilot lights (mod. 12V)
EN
18
