Lavor Fuji, Instruction Manual

Page: 18 / 24

> Steam and water output adjustment
(see fig.
D)
Adjust the steam and water output by using the
two knobs situated on the the left hand side of
the machine
⑧
.
wet steam ;
dry steam ;
•
WARNING:
- For any subsequent adjustment, setting or
replacement of parts not foreseen in this
manual, please contact qualified personnel at
the manufacturer or resale outlet.
- Before carrying out any replacement, ensure
that the main switch is in the (0) OFF position.
> START-UP
Description of the start sequence
After carrying out all the connections and preven-
tative inspections described in the previous chap-
ters, start the machine according to the following
instructions:
- Before starting the generator, fill the tanks with
DETERGENT and DIESEL up to the set level.
TO WASH WITH COLD WATER:
1) Press the main switch situated on the control
panel to the ( I ) ON
⑩
position for working high
pressure cold water
2) Turn anticlockwise the knob gun (see fig.
E)
3) Keep the trigger pressed
TO WASH WITH HOT STEAM
1) Press the main switch situated on the control pa-
nel to the ( II ) ON
⑩
position for steam working
2) Press the BOILER ON button situated on the
control panel to ( I )
⑪
.
3) Turn clockwise the knob gun (see fig.
E)
4) Keep the trigger pressed
- If the display show H2O , it means that there is
no water in the tank. Fill the tank (see “Filling the
tanks with water and detergent”)
> TO SPRAY DETERGENT
To spray and mix the detergent with steam:
- Press button
⑰
situated on the control panel.
> Machine stop (at end of work)
At the end of the work shift, stop the machine in the
following way:
1) Press boiler switch button to (0) OFF
⑪
2) Press main switch to (0) OFF
⑩
.
3) Unplug the machine from the electrical power
supply.
Boiler steam discharge
Follow the instructions below:
- A few minutes before the end of the work shift,
turn off the boiler by pressing the BOILER START
luminous green push-button, continuing to use
the steam gun until the pressure gauge indicates
a value of 0-1 bar;
see fig.
C
Follow the instructions below:
- Carefully open the boiler drain cock
⑳
, situated
on the machine and drain all the water from the
boiler into a suitable container;
WARNING: Danger from hot steam.
IMPORTANT: Should it be necessary for any
reason to de-activate the machine quickly, place
the main switch on the control panel to the OFF
position.
•
WARNING:
• V15 While the machine is functioning, it
is strictly forbidden to remove safety devices
set by the Manufacturer for the purpose of
protecting the operator against incidents.
- Only skilled and qualified operators must use
the machine.
- Avoid aiming the steam lance towards
personnel or delicate objects such as plastic,
crystal or other materials which may melt or
deteriorate with contact to steam at 180°C.
- Never leave the machine unattended.
- Always remove the power supply from the
machine before filling the tanks.
- x
> Steam gun
Use of the steam gun
- Plug the lance jack into the appropriate
socket and lock it with the two levers;
- To obtain a spray of steam, press the trig-
ger on the pistol grip;
EN
18