Lavor ASHLEY 1000 PREMIUM, Instructions Manual, Page: 9 / 44

25 Do not use to vacuum water or other liquids.
26 These machine are not designed for pick-
ing up health endangering dusts or inflam-
mable/explosives substances.
27 The cover of the motor compartment must
only be cleaned with a dry cloth.
29 Service and repairs must be carried out by
qualified personnel only. Only use manufac-
turer original spare parts for service repair.
30 The manufacturer cannot be held responsi-
ble for any damage/injury caused to persons,
animals or property caused by misuse of the
appliance, not in compliance with manual in-
structions.
HOW TO PREPARE AND USE THE
ELECTRIC ASH VACUUM CLEANER
(fig.
① ②
).
• Make sure the filter F1 , F2 is fitted in its
housing.
• Connect the steel pipe C1 to its fitting E1.
•
Before vacuuming the ash, check that it is
cold and no longer alight.
Do not vacuum burning embers
•
Do not empty the drum into a container
which is easily inflammable and make
sure that the ashes are completely cool.
•
If ashes hose C1 becomes hot during use, turn
the device off immediately and let it cool.
• Turn the appliance on using the (I)ON switch,
located on the cover of the motor.
• Vacuum the ash directly from the fireplace
or from the stove (wood or pellet-burning).
Hold the suction nozze about 1 cm. above
the ash.
(see fig.
③
) Automatic filter shaker
T
1: If there
should be a reduction in the suction power,
operate the filter reset buton
T
1 several times
to reset the filter.
• It is advisable, in any case, to clean a max. of
2/3 Kg of ash (wood or pellets) during each
cleaning operation. Operate the filter reset
lever, before each cleaning cycle.
• When the appliance is no longer in use, turn
it off, switch off (0) OFF, and take the plug out.
• When the stove or fireplace has been cleaned,
the appliance and suction filter must then be
cleaned .
CARE AND MAINTENANCE
The unit is maintenance-free.
•
The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
• Clean the exterior part of the machine with a dry
cloth.
• Move the appliance only by catching the car-
rying handle located on the motor head.
• Store the appliance and the accessories in a
dry safe place, out of the reach of children.
FILTER CLEANING
(see fig.
④
)
•
The machine shall be disconnected from its
power source, by removing the plug from the
socket-outlet, during cleaning or maintenance
1- Remove the filter F1 , F2
2- Shake the filter F1 , F2
3- wash tge filter F2
4- Let the filter F2 drying very well ,befor reas-
semble it
•
Once the filter has been cleaned, check
whether it is suitable for further use. If it has
been damaged or broken, replace it with an
original filter.
WARRANTY CONDITIONS
All our machines are subjected to strict tests and are
covered against manufacturing defects in accord-
ance with applicable regulations. The warranty is
effective from the date of purchase.
The following are not included in the warran-
ty: - Parts subject to normal wear. - Rubber parts,
charcoal, filters and the accessories and optional
accessories. - Accidental damage, caused by trans-
port, neglect or inadequate treatment, incorrect or
improper use and installation failing - The warranty
shall not cover any cleaning operations to which
the operative components may be subjected, such
as clogged nozzles and filter blocked due to lime-
stones. This pressure cleaner is intended to be used
for domestic and hobby work: the warranty does
not cover any other different kind of use.
DISPOSAL (WEEE)
As the owner of electrical or electronic equip-
ment, the law (in accordance with the Direc-
tive 2012/19/EU) prohibits you from disposing of
this product or its electrical / electronic accessories
as municipal solid waste and obliges you to make
use of the appropriate waste collection facilities. The
product can be disposed of by returning it to the dis-
tributor when a new product is purchased. The new
product must be equivalent to that being disposed
of.
Acoustic pressure Lpa 75 db (A)
EN
9