Superabrasive
Owner’s manual original language – Lavina
®
V20GE
01/2020
23
7.6 INSTALLING LONGOPAC® REFILL PACKS
When the plastic bag cartridge has reached the end, the plastic bag refill may be installed using the
following procedures:
1.
At
fig. 7.6 pos. 1
, you can see the locked position of the LONGOPACK® plastic bag holder and
to take it off you should:
-
Lift the holder upwards about 10-15mm to unlock it
fig. 7.6 pos.2
;
-
Rotate the holder enough that you can bring it down and take it off from the filter chamber
fig. 7.6 pos.3
;
-
Take off the holder
fig. 7.6 pos.4
;
2.
As you took the holder off from the vacuum, now you can place new LONGOPACK bag refill
by the following steps:
Figure 7.6
Figure 7.6.2
Figure 7.6.1
