LaView LV-T8216YHS, User Manual

Page: 24 / 71

User Manual of LaView Premium HD Digital Video Recorder
24
3.5 PTZ Control
When connect with a network ball, right click the corresponding network channel and select [PTZ]
to enter into the PTZ interface. If access to a simulated ball machine, enter [Main Menu] - [PTZ]
to modify the PTZ protocol, the baud rate and address bits. Then right click in the corresponding
channel and select [PTZ].The PTZ control interface is shown as the following interface.
Figure 3. 8 PTZ Control interface
5. Click to enter the PTZ configuration page.
Figure 3. 9 PTZ Configuration
Refer to 4.2 about more details.
3.5.1 PTZ configuration
The direction of PTZ, steps, zoom, focusing, iris, preset points, cruising between points, patrols,
sweeping the boundary, calling an auxiliary switch, light switch, horizontal rotation are controlled
with the usage of the arrow keys.
The [Step] is mainly used to control directions. The figure can be set from 1 to 8.
Directly click or to adjust zooming, sharpness and brightness adjustment.
PTZ supports eight directions.