25
entered for a 5 pulse-per-revolution encoder. For a 100 pulse-per-revolution encoder a number of 400
would be entered.
The
INC
switch (Figure 9 Item 9) increments the number by 10.
The
DEC
switch (Figure 9 Item 9) decrements the number by 1.
The
CLEAR
switch (Figure 9 Item 8) sets the number to 5. After the desired number is entered, the
MENU switch (Figure 9 Item 8) stores and exits this mode.
Status Mode
The Status mode allows for displaying the control unit power
supply voltage and temperature.
The
INC
switch displays the temperature in both Celsius and
Fahrenheit.
NOTE:
The acceptable operating temperature
range is between 5°C to 50°C (41°F to 122°F).
The
DEC
switch displays the voltage that is applied to the cable for powering the camera.
NOTE:
The
acceptable operating voltage range is between 35.0V and 36.5V.
Status
INC: Temperature
DEC: Voltage
