manualshive.com logo in svg

Lauterbach ICE Emulator, Manual

Share
Download
Lauterbach ICE Emulator Manual Download Page 4

  ICE Emulator for 8051

 

    4     

  

©1989-2019 Lauterbach GmbH

Quick Start

Before debugging can be started, the emulator must be configured by software:

Ready to run setup files for most standard compilers can be found on the software CD in the directory 

…/Demo/I51/Compiler

. All setup files are designed to run the emulator stand alone without target 

hardware.

The following description should make the initial setup (to run the emulator together with the target 
hardware) easier. It describes a typical setup with frequently used settings. It is recommended to use the 
programming language PRACTICE to create a batch file, which includes all necessary setup commands. 
PRACTICE files (*.cmm) can be created with the PRACTICE editor pedit (Command: 

PEDIT <file name>

) 

or with any other text editor.

A basic setup file includes the following parts:

1.

Set cpu-type and -mode

2.

Set system options

3.

Select dualport mode (optional)

4.

Set mapper (optional)

5.

Select frequency (optional)

6.

Activate the emulator

7.

Load application file (optional)

8.

Set breakpoints (optional)

9.

Start application

10.

Stop application (optional)

Summary of Contents for ICE Emulator
















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands