LAUREL LT Series, User Manual, Page: 13 / 56

- 13 -
Click on the Analog Out tab Click on the Analog Out tab Click on the Analog Out tab Click on the Analog Out tab to scale your analog output, which is standard. Under Range, select
0-20 mA Current, 0-10V Voltage, or 4-20 mA. Enter your “Lo Range Reading” and “Hi Range
Reading” to create the two endpoints of your analog output range. For example, for the 4-20
mA range, “Lo Range Reading” corresponds to 4 mA and “Hi Range Reading” corresponds to
20 mA.
ADDITIONAL FEATURES
•
The Commands pull-down menu allows you to execute certain functions by using your
computer mouse. This menu will be grayed out unless a
Get Setup
has been executed.
•
The Readings pull-down menu provides three formats to display input data on your PC
monitor. Use the
Pause
and
Continue
buttons to control the timing of data collection, then
press
Print
for a hardcopy on your PC printer.
-
List presents the latest internal readings in a 20-row by 10-column table. Press
Pause
at any
time to freeze the display. Press Print for a hardcopy.
-
Plot generates a plot of internal readings vs. time in seconds. It effectively turns the
transmitter-PC combination into a printing digital oscilloscope.
-
Graph generates a histogram, where the horizontal axis is the internal reading, and the
vertical axis is the number of occurrences of readings. The display continually resizes itself
as the number of readings increases.
•
The Jumpers pull-down menu graphically shows jumper positions for the selected signal
conditioner boards and the main board, duplicating information in this manual.