Switches
1.
Push the plug into the socket.
2.
Switch on Boiler and Iron
switches and wait for the green
steam light (about 8 to 10 min-
utes).
Starting to use your appliance
4
Always refill the boiler before ironing. If the boiler heats up without water, you
could damage it. Using the appliance with no water in the boiler invalidates your
warranty.
The green steam indicator light illuminates when the
appliance is ready for use.
CAUTION
English
Setting of the iron temperature
This dial only regulates the temperature of the iron soleplate. We recom-
mend that you iron all materials at the same temperature (zone •••). Test
your iron on a rag before commencing ironing. If the iron spurts water,
slightly increase the temperature. If no steam is seen coming out of the iron
reduce the temperature slightly.
After a change of setting it takes about 2 min
for the new temperature to stabilize.
Steam button
Before starting to iron, give 3
bursts of steam to eject water
condensed in the tube, then test
your iron on a piece of material.
If it still spits water increase the
temperature slightly.
CAUTION
Magic Evolution Anglais USA 27.11.2003 14:24 Page 7
