VENTILA
TOR
IRON
Problem
• The vacuum no longer works.
• Blowing no longer works.
• The tip of the table becomes
wet in the storage position.
Probable cause
• The ventilator cable is unplugged.
• The ventilator cable is unplugged.
• Condensation in the cap.
What to do
• Plug it in.
• Plug it in.
• Leave the unit open until the
water has evaporated.
Problem
• The iron spurts out water.
• The iron is no longer giving
out steam.
• The iron does not heat up.
• The iron is too hot.
• The steam lacks pressure.
• The soleplate of the iron is dirty.
• Steam will not stop coming out.
Probable cause
•
The thermostat is not set to zone
•••.
•
The boiler has not been rinsed
recently.
•
The boiler has been rinsed with
a product other than water.
• Boiler empty.
• Iron disconnected.
• System disconnected.
• Disconnected at the wall.
• Switches are off.
• The thermostat has been set to
zone •••.
• The holes in the soleplate are
blocked.
• The boiler is empty.
• This may happen after several
hours of ironing.
•
The steam button is blocked.
What to do
•
Adjust the thermostat to zone •••.
•
Rinse the boiler until the water no
longer contains any residues.
•
Call customer services.
• Refill the boiler.
• Switch both switches on.
• Switch both switches on.
• Plug in at the wall.
• Switch them on.
• Adjust the thermostat following indi-
cations p. 4.
• Unblock them once the iron is cool.
• Fill the boiler with water.
• Clean the soleplate with our Poli-Fer
cleaning mat see p.8.
•
Press the steam button rapidly and
repeatedly.
English
10
Problems/Solutions
Problem
• Is vibrating (BZZ - BZZ).
• Making banging noises (TAC -
TAC) when the boiler is lit.
• The green light comes on and
goes off during ironing.
• The iron is no longer produc-
ing steam. Pressure has
fallen.
BOILER
Probable cause
• The boiler is vibrating.
• The boiler still contains a little
water.
• Water is warming up.
• The boiler is empty.
• The switches are off.
• The wall socket is disconnected.
What to do
• This is normal and will disappear as usage
continues.
• Press the steam button.
• This is normal.
• Fill the boiler with water.
• Switch both switches on.
• Connect to the wall socket.
Magic Evolution Anglais USA 27.11.2003 14:24 Page 13
