Laundrylux EHWF09810M, Installation Manual, Page: 14 / 30

2:2
Installation
Removing Transportation Bolts
Transportation Bolts
The washer is fitted with transportation bolts to prevent internal damage during
transportation. Transportation bolts must be removed before using the washer.
1. Unscrew the 4 bolts with a wrench. Remove the lower 2 bolts first, then the upper two.
One of the bolts retains the power cord of the washer to prevent operating without
removing bolts.
2. Remove the bolts and the sleeves to release the power cord. Keep the 4 bolts
and sleeves for future use.
NOTE: If transportation bolts and sleeves are not removed, it may cause severe vibration,
noise and malfunction, as well as damage to the machine.
NOTE: When the washer is transported the transportation bolts and the sleeves must be
reinstalled
3. Close the 4 holes with the caps supplied.
3
Fig.
3
Install the coin meter housing
1. Take out the coin meter housing from the base.
3. Install and tighten the 4 bolts securely.
2. Unscrew the 4 bolts provided on the coin vault,
put the coin meter housing on the vault, (a)
carefully feeding the two wiring harnesses into
the housing.
4. Install the front plate of the coin meter and fasten
it.(b)
5. Install the coin meter.(c)
7. Install the cover of the coin meter housing.(d)
2
a
b
c
d
Fig.
2
6. Plug the coin meter(s) into the Coin 1 (Red) and
Coin 2 (White) harnesses.