X-431 ADAS PRO Calibration Tool User Manual
22
Switch the electromagnet on so that it can firmly attach on the radar
reflector. To detach it, turn the lever off.
7
Angular Attachment plate
To mount the radar kit on the cross member.
*Note: There are total 3 positions marked with numbers (1, 2 & 3) for hanging
on the cross member. While calibrating the radar sensor, you will be asked to
switch to the different hanging positions of the radar reflector.
*Note: Items 3~6 are main parts of the magnetic laser.
Replacing the batteries
Proceed as follows to replace the batteries:
1. Switch off the laser beam (3) with the switch (2).
2. Loosen the screw of the battery compartment cover (4), and then push it along the
OPEN indicator to remove it.
3. Take out the batteries individually and follow the correct installation direction/battery
polarities to install the new batteries.
4. Reassemble it in reverse order.
3.8 Laser Distance Meter
3.8.1 Installing the battery
1. Open the battery cover.
Summary of Contents for X-431 ADAS PRO
Page 4: ......
