LAUNCH X-431 ADAS PRO Calibration Tool User Manual
15
3.5 Laser Module
Fig. 3-5
No.
Description
1
Output of the laser beam
Output for laser beam.
Use the laser beam to read the actual value at the scales of the cross
member and at wheel clamp.
2
Mounting bolt
Use this to secure the laser module on the cross member.
3
Switch
Switch the laser on and off.
4
Battery compartment cover
3 type AA batteries can be inserted into the battery compartment.
Installing/replacing the batteries
Proceed as follows to replace the batteries:
1. Switch off the laser beam (1) with the switch (3).
2. Loosen the screw of the battery compartment cover (4), and then push it along the
indicator to remove it.
Summary of Contents for X-431 ADAS PRO
Page 4: ......
