LAUNCH
Tyre Changer(TWC-502RMB)
13
Fig.32
Fig.33
Air Pressure Regulator, Gauge and
Lubricator Assembly
l
As shown in Fig.34, there is a button on the
regulator. When pulled up, the pressure can be
increased or decreased by turn it clockwise or
counter-clockwise. After adjusting the operation
pressure, press the button down to lock it.
l
The air cleaner works to filter the water and
impurity in the compressed air. When water
and impurities run beyond the red line, turn open
the draining valve to release them.
l
The lubricator is used to add a certain amount of
lubricant into gas for the moving parts in the
cylinder and regulator. Depress pedal H or J
3
~
5 times, a drop of lubricant will fall into the
cup in the regulator. If it does not happen, the
adjusting screw need to be adjusted.
Fig.34
Direction of the switch
’
s installation
Fig 35
文件使用
"pdfFactory Pro"
试用版本创建
Summary of Contents for TWC-502RMB
