LAUMAS LCB, User Manual

Page: 38 / 80

- 33 -
COMMUNICATION INTERFACE
WRITING READING

Write the value in W1.

Send command 1007 to CMDR.

Send command 1006 to CMDR.

Read the value in R1.
NO COMPARISON TIME

(from 0.0 to 999.9 seconds; default: 0.0): this is the instrument waiting time during batching,
after the opening of PRESET, before comparing the weight with the programmed SET value.
COMMUNICATION INTERFACE
WRITING READING

Write the value in W1.

Send command 1097 to CMDR.

Send command 1096 to CMDR.

Read the value in R1.
NO PRODUCT LOAD TIME

(from 0.0 to 999.9 seconds; default: 0.0): this parameter allows the product control during
batching. if there is no product load, the instrument waits for a set duration of time before activating
the alarm
 .
COMMUNICATION INTERFACE
WRITING READING

Write the value in W1.

Send command 1033 to CMDR.

Send command 1032 to CMDR.

Read the value in R1.
NO PRODUCT UNLOAD TIME

(from 0.0 to 999.9 seconds; default: 0.0): this parameter allows the product control during
the unloading phase (cycle end). If there is no product extraction, the instrument waits for a set
duration of time before activating the alarm
 .
WARNING: The control is only actuated after unloading of the product has started (the weight must
decrease by at least 10 divisions).
COMMUNICATION INTERFACE
WRITING READING

Write the value in W1.

Send command 1035 to CMDR.

Send command 1034 to CMDR.

Read the value in R1.