Laufen CLEANET RIVA, Operating Manual

Page: 57 / 69

57
REPLACING THE COVER RING
If the cover ring becomes calcified or scratched, it can be
replaced with a new one. Replacement cover rings can in a
set with the nozzle be purchased from Laufen or specialist
dealers.
You will require a special tool to replace the cover ring.
The tool is supplied with the new cover ring.
Insert the special tool into the opening at the bottom edge of
the cover ring.
Gently push down the tool until the cover ring lifts out of the
snap retainer. Prevent the facing from falling using your other
hand. Lift out the facing completely and remove.
Insert the top edge of the new cover ring and push until it
clicks into place. Make sure that the tool opening is pointing
downwards.
10.17
10 MAINTENANCE AND CLEANING