44
Thermal cleaning required
THERMAL CLEANING, AUTOMATIC
Thermal cleaning flushes the entire water-carrying system on your shower toilet with hot water
to eliminate bacteria and germs. An illuminated red LED indicator light on the appliance and
corresponding service information on the remote control inform you that thermal cleaning is due.
After the message appears, you can continue using the shower toilet in the usual way. However,
we recommend performing the suggested thermal cleaning cycle within a few days of the
message appearing. The process takes about 35 minutes.
The automatic reminder function for thermal cleaning is enabled by default. For further descriptions,
see section 6.5, Thermal cleaning reminder function, and section 10.10, Thermal cleaning, manual.
Once started, thermal cleaning can be interrupted. However, we recommend that you do not
interrupt the program to allow thermal cleaning to finish completely.
Prior to thermal cleaning, water is heated and the air purifier is activated on a high setting.
The appliance may emit noises, which is completely normal. Wait until the thermal cleaning cycle
has completely finished.
Thermal cleaning is performed using hot water: Caution, risk of scalding! Do not sit on the shower
toilet during thermal cleaning.
Thermal cleaning message
The LED indicator light on the shower toilet lights up red.
Your remote control indicates “Thermal cleaning required”.
Press “Service info” to open the “Thermal cleaning” menu.
Please do not sit on the shower toilet.
Leave the cover open during thermal cleaning.
10.10
10 MAINTENANCE AND CLEANING
Summary of Contents for CLEANET RIVA
Page 1: ...LAUFEN CLEANET RIVA OPERATING MANUAL...
Page 2: ......
Page 69: ...WWW LAUFEN CLEANET COM...
