manualshive.com logo in svg

Laufen CLEANET RIVA, Operating Manual, Page: 31 / 69

Share
Download
Laufen CLEANET RIVA Operating Manual Download Page 31

31

REAR SHOWER

REAR SHOWER

Operation while using the shower toilet

While you are sitting on the shower toilet, briefly press the rotary  

button on the right side to start the rear shower.  
Press the rotary button again to stop the rear shower prematurely.  

The shower settings are the same as the default setting or the  

selected user profile.

If you wish to activate the shower again, press the rotary button while 
the shower arm is retracting at the end of the first showering procedure. 

Operation using the remote control

Press “Rear shower” to start the process.  

The display switches to the “Rear shower” menu.

Press “Stop” to stop the rear shower prematurely. The shower settings 
are the same as the default setting or the selected user profile.  
When the rear shower stops, the display returns to the main menu.

If you wish to activate the shower again, press “Rear shower” while the 
shower arm is retracting at the end of the first showering procedure.

If you shower repeatedly, the water will become gradually cooler.

 9.3 

9  OPERATING THE SHOWER TOILET

Summary of Contents for CLEANET RIVA






































































Reviews:

No comments