Lauda VF 20040 C, Operating Instructions Manual

Page: 12 / 42

Switching the appliance on and off
The appliance can only be switched on and off from the user profile "User" (see points 6.3 and 6.4 in the operating
instructions). Switch on the appliance by setting the main switch (see point 5 of the operating instructions) to position "I".
Approx. 5 seconds after the control element has booted up, the overtemperature Tmax 1 alarm appears on the display and
the alarm signal sounds. Acknowledge the alarm on the display.
Selecting a user profile
To select a user profile such as User (point 6.4 of the operating instructions), tap the "Login" symbol and user profile
display. Tap the desired user profile to select it, enter the relevant password for the selected profile
(point 6.4. of the operating instructions) and press save to exit the screen.
Managing access rights for user profiles (login and user profile display)
Admin 1
All settings required to integrate the freezer into the operator's IT landscape, for example, can be configured under the
user ID Admin1. The default password is "Admin 1".
Guest
The freezer appliance is started under the user ID "Guest". All relevant operational data can be accessed on this level.
It is not possible to switch the appliance on and off or modify settings on this level. The default password is "Guest".
User
Users logged in to the "User" profile can configure settings such as those for switching the appliance on and off as well as
the refrigeration compartment temperature set point and the alarm delay for the door. The default password is "User".
Service
Under the "Service" user ID, the operator/user can modify more advanced settings than those on the "User" level, including
changing parameters or set point temperature limits and transferring data via USB. The default password is "Service".