Lauda VC 1200, Operation Manual

Page: 9 / 100

1.6 Software versions
These operating instructions are valid for devices using the following software
versions onwards.
Software valid from version
Command operating system 3.45
Control system 1.35
Analogue IO module 3.24
RS 232/485 module 3.22
Digital IO module 3.14
External temperature module 1.35
Ethernet module 1.23
EtherCAT module 1.06
1.7 Prohibition of modifications to the device
Any technical modification of the device by the user is prohibited. Any
damage resulting from unauthorized modification is not covered by customer
service or the product warranty. Service work may only be performed by the
LAUDA Service department or a service partner authorized by LAUDA.
1.8 Requirements for the heat transfer liquid
n
Heat transfer liquids are used to control the temperature. LAUDA heat
transfer liquids are recommended for the constant temperature equip-
ment. LAUDA heat transfer liquids have been tested by the company
LAUDA DR. R. WOBSER GMBH & CO. KG and approved for this
device.
n
The heat transfer liquids are suitable for a specific temperature range.
This temperature range must correspond with the temperature range of
your application.
n
Hazards caused by high or low temperatures or fire may arise during
operation if the heat transfer liquid exceeds or falls below certain tem-
peratures or if the container ruptures causing a reaction with the heat
transfer liquid.
n
The safety data sheet of the heat transfer liquid specifies hazards and
the corresponding safety measures required for handling the liquid. The
safety data sheet of the heat transfer liquid must therefore be observed
to ensure proper use of the device.
n
If you wish to use your own heat transfer liquids, check to ensure that
the fluids are compatible with the materials used.
n
The heat transfer liquid must be provided with corrosion protection.
1.9 Materials
All parts that come into contact with heat transfer liquid are manufac-
tured from high-quality materials adapted to withstand the operating tem-
perature. High-quality stainless steels, copper, brass and premium-quality
heat-resistant plastics are used.
V08 Variocool 9 / 97