Lauda VC 1200, Operating Instructions Manual

Page: 9 / 112

1.6 Software versions
These operating instructions are valid for devices using the fol-
lowing software versions onwards.
Software valid from version
Command operating system 3.45
Control system 1.35
Analogue IO module 3.24
RS 232/485 module 3.22
Digital IO module 3.14
External temperature module 1.35
Ethernet module 1.23
EtherCAT module 1.06
1.7 No modifications may be made to the device
Any modification of the device by the user is prohibited. The conse-
quences of any such modifications are not covered by the product
warranty or customer service. Service work is only permitted to be
carried out by the LAUDA Constant Temperature Equipment
service department or one of the service partners authorised by
LAUDA.
1.8 Requirements for the heat transfer liquid
n Heat transfer liquids are used for temperature control. Only
LAUDA heat transfer liquids are approved for use in the device.
LAUDA heat transfer liquids are tested and approved by
LAUDA DR. R. WOBSER GMBH & CO. KG
n In each case, the heat transfer liquids cover a specific tem-
perature range. This temperature range must match the tem-
perature range of your application.
n The use of heat transfer liquids can cause hazards arising from
high and low temperatures, and fire, if certain temperature
thresholds are exceeded or if the temperature falls below the
threshold value, or if the container breaks and there is a reac-
tion with the heat transfer liquid.
n
The safety data sheet specifies the hazards and appropriate
safety measures for handling the heat transfer liquid. The
safety data sheet of the heat transfer liquid must therefore be
consulted for the intended use of the device.
Safety
Variocool 9