Lauda VC 1200, Operating Instructions Manual

Page: 69 / 112

2. Select the appropriate menu item in the parameter list.
n The internal and the external control parameters can be
reset using Control parameter .
n The settings for the internal sensor can be reset with
internal Pt1000 .
n Setpoint and maximum current consumption can be reset
with miscellaneous . The control is also set to internal
control.
3. Select one of the following options in the input window:
n Selecting no returns to the previous display without
making any changes.
n Selecting yes resets the selected parameter if you con-
firm this with the OK button.
Personnel:
n
Operating personnel
1. Select the menu item Reset all .
2. Select one of the following options:
n
Selecting no returns to the previous display without
making any changes.
n
Selecting yes restores the factory settings if you confirm
this with the OK button.
6.16 Device status
6.16.1 Retrieving device status
Personnel: n Operating personnel
1. Change to the main menu.
2. Select the menu item Setup

Device status .

The Device Status menu is displayed.
3. You have the following options:
n
Read Errorstore
n Retrieving device data
n
Request software version
n Request device type
n
Request serial numbers
Fig. 54: Resetting control parameters
Restoring all settings
Fig. 55: Reset confirmation
Fig. 56: Device status
Operation
Variocool 69