Lauda Proline RP 845 C, Operating Instructions Manual, Page: 74 / 120

Proline Edition X cooling thermostats
74
Starting up
YACE0100 / October 4, 2018
Parameter Sl ave controller (P-controller):

Sl proportional range: iP = Xpf in Kelvin.

Tve, Tde, Prop_E changeover to Auto/ Man
E A = automatic or E MN = manual.
Works setting is automatic. These three parameters should only be
modified by experienced control technicians!
Hold pressed for 3 seconds, then make changes.

Correction limitation Et0l See introduction (

7.13.2).
Command
Control Control Parameters Control
Parameters

Open the device parameter menu via the
soft key Menu .

With the cursor keys continue to

Control

Control Parameters

Control Parameters .

The adjacent window appears.
Parameter endings:
e = Master controller, f = Slave controller.

Where applicable change parameters
marked with (auto) to manual input with
Tv manual/auto .

Select the parameters to be changed with
and confirm with .

Then change the value in the following
settings window and confirm with .

Correction limitation see introduction
(

7.13.2).
Pump Menu End T
set
T
fix
Control Parameters
Control para. sets
Tv manual/auto
Correction limitation
Kpe 0,50
Tne 100
Tve (auto) 83
Tde (auto)
8,3
Xpf 4,0
Prop_E(a) 30
Et0l °C
E A
°C