Lauda P 10 Operation Manual Download

Page: 107 / 160

Touch the [Duration of temperature increase] button.



The entry window will open.

Enter the numerical value in the input window (unit not available!).

Press the [OK] button to return to the previous screen with the new

setting configured.

The [Status] button is provided to activate/deactivate the ramp func-

tion.



Slide switch set to [Off]: The ramp function is not active.



Slide switch set to [On]: The ramp function is started immedi-

ately.

When the ramp function is executed,

Active

appears on the

[Ramp] tile.

6.11

Timer and countdown

6.11.1

Timer

CAUTION!

Automatic device start with the timer

Scalding, cold burns, injury



Before using the timer, ensure that all preparatory meas-

ures for intended use have been implemented!

The constant temperature equipment can be set to execute an action at

any predefined time via the timer. Actions include: Setting the constant

temperature equipment to standby or operation mode and executing a pro-

gram from the program encoder.

Fig. 68: Timer with start action

PRO bath thermostats and circulation thermostats

107 / 156

Summary of Contents for P 10

































































































































































Search results

Summary of Contents for P 10

Reviews:

Related manuals for P 10

Brands by name

Popular brands

Lauda P 10, Operation Manual

Search results

Summary of Contents for P 10

Reviews:

Related manuals for P 10

Brands by name

Popular brands