
5 Before starting up
5.1
Installation
WARNING!
A sloping floor may cause the device to fall over/roll away
Injury, crushing, impacts
Do not tilt the device.
Position the device on an even, non-slip surface with a
sufficient load carrying capacity.
Only maneuver the device over non-slip surfaces with a
maximum incline of 2 percent.
To park the device, let go of the dead man's brake handle
and apply both locking brakes.
Do not place heavy objects on the device.
WARNING!
Danger of overpressure from high ambient temperatures
Fire, injury, leaking refrigerant
Note the permissible ambient temperature and storage
temperature, see
WARNING!
Bursting of the cooling circuit
Fire, impacts, cutting, device damage
Always maintain the permissible ambient conditions speci-
fied in the technical data.
In small areas, maintain the ambient temperature by pro-
viding additional room ventilation or cooling.
V1
Mobifreeze
31 / 93
Summary of Contents for Mobifreeze M270
