1 Safety
1.1
Safety notices
The operating manual informs you how to handle the device as intended
while taking safety aspects and hazards into consideration. The operating
manual of the constant temperature equipment on which you operate the
device and, if applicable, the safety data sheets of the accessories used also
apply. In case of doubt, the applicable rules and regulations at the place of
installation have precedence.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
n
Read this operating manual carefully before use.
n
In addition, refer to the operating manual of the constant temperature
equipment on which you operate the unit.
n
Follow all the safety instructions on the device and in the operating
manual.
n
Always keep the operating manual within easy reach near the device.
n
This operating manual is part of the device. Never pass the device on to
third parties without the operating manual.
n
Ensure that the device is only operated by trained operating personnel
or qualified personnel.
n
The user must have read and understood this operating manual and be
able to follow all the information and instructions given.
n
Use appropriate personal protective equipment when carrying out any
work on the device or connected components.
n
Install the device on an even, non-slip surface. The installation surface
must not be combustible or sensitive to moisture.
n
Keep flammable materials and liquids away from the immediate vicinity
of the device. Do not store them above the device.
n
Only set up the device indoors and protect it from condensation and
dripping.
n
Always check the device, the LiBus cable and the hoses for damage and
leaks before operation. Any defects found must be remedied in line with
good professional practice before operation.
n
Never operate the device without heat transfer liquid.
Operating manual
Personnel
Installation
Operation
V2
Flow controller MID 80
5 / 38