Do not tilt the device
Never stand under suspended loads
Slip hazard due to liquid on the floor
Lock the castors
The yellow cable (earth wire) may remain live, even when the main switch is
turned off!
Disconnect the device from the mains before carrying out (service) work on
the device.
Connect the correct cable and provide the appropriate mains power supply.
1.17
Information label
This symbol indicates an inflow into the device. This symbol refers to the
pump inflow of the thermostatic circuit, unless there is an additional symbol.
If the additional cooling water symbol appears in the immediate vicinity of
the "inflow" symbol on a water-cooled device, this symbol refers to the inlet
of the cooling water circuit.
This symbol indicates an outflow out of the device. This symbol represents
the pump outflow of the thermostatic circuit, unless there is an additional
symbol. If the additional cooling water symbol appears in the immediate
vicinity of the "outflow" symbol on a water-cooled device, this symbol refers
to the outlet of the cooling water circuit.
Inflow
Outflow
V4
Integral process thermostats with flow control unit
16 / 171
