ECO GOLD
25/08/2011/ YACE0088
Appendix with settings
93
−
Access to the main menu level is obtained by pressing the
enter key
.
−
Selection and confirmation of
Æ
Setup
Æ
Control
Æ
Setpoint offset
.
The adjacent menu window appears.
As well as
Diff.set/actual value
the currently set offset value is
displayed.
The adjacent menu window appears on selecting the menu
point
Offset source
.
−
Select and confirm setpoint source with or and
.
The setpoint offset is deactivated with "off".
−
Select
and
confirm
Diff.set/actual value
with or and
.
The adjacent menu window appears. The minimum and maxi-
mum possible offset values and the current offset value are
displayed.
−
Change the value with or .
−
Single figures can be selected by pressing or .
−
By
pressing (+/-) the arithmetic sign can be changed.
−
Confirm your choice with the enter key
.
−
By pressing (ESC) you are returned to the menu level without any change.
E
Programmer
The programming function enables you to save five temperature/time programs. The programs consist of
a number of temperature/time segments and details about their repetition. The total number of freely
programmable segments is 150. Temperature step changes (time is zero) or also temperature retention
phases for the same start and end temperatures in the segment are possible.
On starting the current set value is taken as the starting value of the first segment.
Changes to the pump level are entered in the relevant line. If the pump level is to remain unchanged, "0"
is entered (display shows "---").
ESC
סּ
OK
Standby
Setpoint offset
Offset source
Diff.set/actual value 0.0
ESC
סּ
OK
+/-
Offset value
Diff.set/actual value
Max:
500.0
Min:
-500.0
0.0
ESC
סּ
OK
Standby
Offset source
off
extern Pt100
extern analog
extern
serial
extern
USB
