MachXO5-NX Development Board
Preliminary Evaluation Board User Guide
© 2022 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
56
FPGA-EB-02052-0.90
Appendix C. User Defined Preference File Listing
// These names follow the MachXO5™-NX Development Board schematic but,
// they may be defined by the user. Thus, they can be copied into the
// preference file and edited to match a different naming convention if
// needed or used to fill in the Spreadsheet view.
// MachXO5-25 LED Connections
// Note: The following order matches the LED locations on the board
// from top D1 to bottom D8
ldc_set_location -site {R3} [get_ports {LED[0]}]
ldc_set_location -site {R2} [get_ports {LED[1]}]
ldc_set_location -site {R1} [get_ports {LED[2]}]
ldc_set_location -site {P7} [get_ports {LED[3]}]
ldc_set_location -site {H12} [get_ports {LED[4]}]
ldc_set_location -site {H11} [get_ports {LED[5]}]
ldc_set_location -site {G13} [get_ports {LED[6]}]
ldc_set_location -site {G12} [get_ports {LED[7]}]
//DIP Switch Connections
ldc_set_location -site {T1} [get_ports {DIPSW[0]}]
ldc_set_location -site {T2} [get_ports {DIPSW[1]}]
ldc_set_location -site {T3} [get_ports {DIPSW[2]}]
ldc_set_location -site {T4} [get_ports {DIPSW[3]}]
//Push Button Connections
ldc_set_location -site {E19} [get_ports PB1]
ldc_set_location -site {F20} [get_ports PB2]
ldc_set_location -site {B7} [get_ports PB3]
ldc_set_location -site {G20} [get_ports PB4]
//Clock inputs
ldc_set_location -site {E14} [get_ports CLK_12MHz]
ldc_set_location -site {T7} [get_ports CLK_25MHz]
ldc_set_location -site {B1} [get_ports CLK_27MHz]
ldc_set_location -site {V1} [get_ports CLK_125MHz]
ldc_set_location -site {D19} [get_ports CLK_EXT]
//SEG LED Connections
ldc_set_location -site {A18} [get_ports SEG_LED_DP]
ldc_set_location -site {A17} [get_ports SEG_LED_G]
ldc_set_location -site {A16} [get_ports SEG_LED_F]
ldc_set_location -site {A15} [get_ports SEG_LED_E]
ldc_set_location -site {F11} [get_ports SEG_LED_D]
ldc_set_location -site {E15} [get_ports SEG_LED_C]
ldc_set_location -site {G11} [get_ports SEG_LED_B]
ldc_set_location -site {F14} [get_ports SEG_LED_A]
//HyperRAM
ldc_set_location -site {D2} [get_ports ram0_1_rst]
ldc_set_location -site {J2} [get_ports ram0_ck_p]
ldc_set_location -site {J1} [get_ports ram0_ck_n]
ldc_set_location -site {J3} [get_ports ram0_cs]
ldc_set_location -site {H1} [get_ports ram0_dq0]
ldc_set_location -site {H2} [get_ports ram0_dq1]
ldc_set_location -site {J4} [get_ports ram0_dq2]
ldc_set_location -site {J5} [get_ports ram0_dq3]
Summary of Contents for MachXO5-NX Development Kit
Page 63: ......
Page 64: ...www latticesemi com...
