Lattice Semiconductor MachXO2 Breakout Board User Manual Download Page 22 | Manualshive

Page: 22 / 33

background image

MachXO2 Breakout Board Evaluation Kit
Evaluation Board User Guide

© 2014-202

2

Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at

www.latticesemi.com/legal

All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.

22

FPGA-EB-02051-2.3

8. Troubleshooting

Use the tips in this section to diagnose problems with the Breakout Board.

8.1.

LEDs Do Not Flash

If power is applied but the board does not flash according to the preprogrammed counter demonstration, then it is
likely the board has been reprogrammed with a new design. Follow the directions in the

Demonstration Design

section

to restore the factory default.

8.2.

USB Cable Not Detected

If Lattice Diamond Programmer or ispVM System does not recognize the USB cable after installing the Lattice USB port
drivers and rebooting, the incorrect USB driver may have been installed. This usually occurs if you attach the board to
your PC prior to installing the Lattice-supplied USB driver.

8.3.

To access the Troubleshooting the USB Driver Installation Guide

To access the installation guide for Diamond software and standalone Diamond Programmer:

1.

Start Diamond or Diamond Programmer and choose

Help

.

2.

Search for

USB driver

or

Troubleshooting

, then select the

Troubleshooting the USB Driver

topic.

3.

Follow the directions to install the Lattice USB driver.

To access the installation guide for ispVM:

1.

Start ispVM System and choose

Options > Cable and I/O Port Setup

. The Cable and I/O Port Setup Dialog appears.

2.

Click the

Troubleshooting the USB Driver Installation Guide

link. The Troubleshooting the USB Driver Installation

Guide document appears in your system’s PDF file reader.

3.

Follow the directions to install the Lattice USB driver.

8.4.

Determine the Source of a Pre-Programmed Device

If the Breakout Board has been reprogrammed, the original demo design can be restored. To restore the board to the
factory default, see the

Download Demo Designs

section for details on downloading and reprogramming the device.

«
...
20
21
22
23
24
...
»

Summary of Contents for MachXO2 Breakout Board


































Reviews:

No comments

Related manuals for MachXO2 Breakout Board

Brand: IBASE Technology Pages: 92

Brand: ST Pages: 11

Brand: QDI Pages: 23

Brand: ASROCK Pages: 198

Brand: Gigabyte Pages: 100

Brand: JETWAY Pages: 48

Brand: AKM Pages: 30

Brand: JETWAY Pages: 52

VAR-SOM-MX8M-NANO

Brand: Variscite Pages: 2

Brand: Vox Pages: 23

Brand: Gigabyte Pages: 40

Brand: TYAN Pages: 164

Brand: Texas Instruments Pages: 20

Brand: Texas Instruments Pages: 24

Brand: MSI Pages: 77

Brand: Zeal-All Pages: 8

Brand: Portwell Pages: 9

Brand: DFI Pages: 26

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands