To ensure accuracy, we recommend setting the zone to a minimum of 100m.
You can set the shape of your zone as either a square or circle and change the zone’s colour
using the location icons.
Give your zone a name
Once you’re done, press ‘Save.’
To add another zone, press + and repeat the steps.
You can also assign up to 7 WIFIs to each individual zone you create. This can improve the
Safety Zone alert accuracy and reduce false alerts. No WIFI login credentials are required, but
make sure your phone has an existing connection to the WIFI you wish to select.
15.2 – How to edit your zones
To temporarily turn a zone off, press the toggle switch
To edit a zone, just tap it to open it up
You can change the location of the zone, its size, name, and icon. Just press ‘Save’ when
you’re done
To delete the zone, press the ‘Delete’ button
15.3 – Why is there sometimes a delay in receiving Safety Zone notifications?
Sometimes, there is a delay in receiving the Safety Zone notification.
Pawfit will send a Safety Zone alert when the fence boundary lies in-between the latest location and
the one before it. To determine if your pet has crossed the fence line, Pawfit needs to receive the latest
location update.
Pawfit updates your pet’s location every 30 seconds to 2 hours, depending on how active your pet is.
The faster they move outside the Safety Zone, the more quickly their location is updated and the
sooner the notification is received.
If Pawfit is in live tracking mode, then you can expect the alert to be received almost immediately
after your pet crosses the virtual border.
Assigning WIFIs to zones as mentioned above can also improve accuracy and notification speed.
