manualshive.com logo in svg

Lathem PC700, User Manual

Share
Download
Lathem PC700 User Manual Download Page 14

 

10  

•

  PayClock Online 

 

Changing settings at the Clock 

The default settings that can be changed by the administrator at the 
clock or the PayClock Online software are:  

•

 

Time Zone: The time zone is set to Eastern Time. 

•

 

Daylight Savings Time: Daylight savings is turned on. 

•

 

Time Format: The display will show the hours in a 12-hour 
(AM/PM) format. 

The default settings that can only be changed through the PayClock 
Online software are:  

•

 

PIN Entry: PIN entry is turn on. 

•

 

Badge Entry: Badge entry is turned on. 

•

 

Allow Amounts: Amount entry is turned on. 

•

 

Maximum days to store registrations on clock: Is set to 90 
days. 

•

 

Send Date/Time on poll or update: Is turned on. 

•

 

Send worked hours and benefit time after poll: Is turned on. 

How do I change the time zone? 

•

 

From the clock touchpad press the Admin button. Enter the 
administrator password (PIN) and press the Enter button. 

•

 

The Administrator Main Menu screen will display. 

•

 

Press Date/Time Setup. The Date Setup screen will display. 

•

 

Press the Time Zone button. The Choose Time Zone screen 
will display. 

•

 

Using the up and down arrow keys select the desired time 
zone and click OK. 

•

 

When finished press the back 

 button until you have 

returned to the default screen. 

Summary of Contents for PC700





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands