Operating Procedures
Recommended Blades
Operating Procedures
8/18/20
4-17
4
LEFT TURNS
Left Zero-turn:
Evenly push the right control lever forward slowly while pulling the
left control lever backwards.
Left Turn Forward:
Push the right control lever full forward while pushing the left
control lever slightly forward.
Left Turn Reverse
: Pull the left control lever full backward while pulling the right
control lever slightly backward.
4.6
Recommended Blades
LOW-LIFT BLADE
Low-Lift Blade is recommended for 1”-2” cutting height. Use a Low Lift Blade when the
conditions are dry, the region is experiencing a drought, in sandy soil areas or when per-
forming seasonal scalping. When conditions like this are evident, lift created by the cutter
blades can be reduced, decreasing the abrasion wear to the cutter blades and deck
caused by sand. The Low Lift Blade will also help reduce cutter deck blowout during the
conditions stated above.
HIGH-LIFT BLADE
High-Lift Blade is recommended for cool season grasses and cut heights of 2” and above,
unless in sandy conditions. These blades are shipped standard on all mowers.
Use a High Lift Blade when the conditions are extremely wet or heavy. The High Lift
Blades will create greater lift that may be needed in difficult cutting conditions. Additional
deck cleaning may be required when using High Lift Blades.
CM0089
Left
Zero-turn
Left Turn
Forward
Left Turn
Reverse