Initial Set-Up
Engine
Initial Set-Up
9/27/19
3-16
3
3.21 Engine
1.
Check the exhaust while the engine is running.
During proper operation, the exhaust should be colorless. If the engine runs continuously
with dark exhaust, stop the engine and correct the problem before operating your Articu-
lator.
2.
Listen for any suddenly slows downs or accelerations, abnormal noises, rough running, or
displays any other usual characteristics.
3.
Stop the engine and correct the problem before operating your Articulator.
3.22 Hour Meter
The hour meter is located on the control panel. This meter records the total hours on the
engine, and cannot be reset. You may wish to record the hour meter reading prior to oper-
ation of your Articulator for tracking of maintenance schedules, job timing, billing, or other
records.
3.23 Maintenance Checklists
Complete the appropriate maintenance checklists in a timely manner. (
See Section 5
).