Lastec 721XF, Owner'S Manual

Page: 26 / 55

Initial Set-Up
Assembly Instructions
3
3-2 Lastec//021819 Initial Set-Up
3.1 Assembly Instructions
The Model 721XF requires a minimum amount of assembly prior to mounting to the trac-
tor. Follow the procedures listed below to assemble the Articulator:
1. Mount the push arms onto the Articulator push bar. Orient the arms so that they bend out-
ward as they extend from the tractor, as shown in the illustration below.
2. Install the lift pins into the
Articulator push arms. The
pins locate to the outside of
the arms, with the 7/8” split
lock washers and 7/8-14 hex
nuts to the inside of the arms.
3. Spacers on the push arms can
be arranged as needed for the
best fit to the tractor hitch.
Spacers
721_050