Maintenance
First 8 Hours
Maintenance
Lastec//021819
5-3
5
Perform the appropriate maintenance procedures listed in your tractor manual.
Verify proper installation, operation and flow of grass chutes.
5.2
First 8 Hours
Check deck alignment and belt tension.
Lubricate the PTO quick-disconnect pin or twist sleeve. (
Recommend the use a
nickel-based anti-seize for these areas).
5.3
First 50 Hours
Change gearbox lube with 75W-90 gear oil.
5.4
Every 50 Operating Hours
Check deck alignment and belt tension.
Check deck drive belt alignment.
Grease all blade spindle bearing housings.
Fill until grease purges from the weep
hole in the side of the bearing housing.
Inspect all bushings for wear. Replace as needed.
Inspect gearbox pivot stop bolts, wear pad, and bushings. Replace or adjust as
needed.
Check and clean, if necessary, any debris that may have accumulated during
operation.
Check gearbox lube level and condition.
5.5
Every 200 Operating Hours
Change the gearbox oil
(6 ounces SAE 75W-90 Grade gear oil).
Summary of Contents for 100EFK
