Manual / Bedienungsanleitung: EL-200 LED
Version / Stand: Jun-13
Page / Seite 6 of / von 10
Never look directly into the light source. Always disconnect from the mains when the
device is not in use or before cleaning it.
Troubleshooting
Problem
Possible cause
No function / fan not working
Check mains connection
Effects don’t change to the beat of the music Adjust sensitivity with the dial on the front.
Check if device isn’t in DMX or autom. mode
Problems with DMX control
Check DMX address selection
Device not working, but fan working
Turn device off for ca. 1 Minute.
Technical specifications
Power supply:
AC 85V-250V, 50/60 Hz
Ambient temperature:
+10°C … +35°C
Power consumption:
40 W
Operation modes:
DMX 512, automatic, music mode
Lasersources:
aircooled DPSS laser (green), diode laser (red)
Optical power
(at the laser): max 200mW; >40mW 532nm green, >110mW 655nm red
LED:
5W RGB
Beam:
ca. 3mm/1mrad
Laser class:
3b
Scanning system:
gratings
Weight:
2.5 kg
Dimensions:
36x11x12 cm (W x D x H)
Loudness:
<70dB
Please note
This device has left our premises in absolutely perfect condition. In order to maintain this condition
and to ensure a safe operation, it is absolutely necessary for the user to follow the safety instructions
and warning notes written in this user manual.
Laserworld cannot be made liable for damages caused by incorrect installations and unskilled
operation!
This manual is subject to changes without notification. Contact your local dealer for an update, or
check our website www.laserworld.com
For service contact your dealer or Laserworld. Only use Laserworld spare parts.
Data subject to change without notice. Errors and omissions expected!
