11 of 49
June 2012
Switching On
Connect the ADM-1000 to a suitable Lasermet detector head using the supplied
lead.
To turn the unit on, press and hold the
‘
I
’ button at the top of the keypad (refer
to the keypad layout diagram 1 below)
for 1 second until the unit beeps.
The meter will set itself to the last used
settings depending on the connected
head.
If no head is connected, the message
‘No Head’ flashes on the display and
the meter should be turned off before
attaching a head.
If powering the unit from a P.C. using a USB port, the unit will turn itself on as
soon as the P.C. enables the USB port.
To turn the unit off, press and hold the ‘O’ button at the top of the keypad until
the unit turns off.
If the ADM-1000 is connected to a USB port,
turn it off by pressing the ‘O’
button until the progress bar fills up (this ensures the settings are saved),
then unplug the USB lead to turn the unit off.
