BLU-3DGLSBT
QUICK START GUIDE
1
PRODUCT CONNECTIONS AND USE
Powering On, Off and Pairing
Pairing Instruction
(Required for each new connection)
From the on position, look through your BLU-3DGLST glasses, then press
and hold the power button until 3D vision engages.
Power On
Press and hold the On/Off button until the blue indicator light appears.
Once the unit has powered on, the blue light will disappear after 5
seconds.
Power Off
Press and hold the On/Off button until the blue indicator light flashes
three times. The unit will then be powered off.
3D Mode Switch
After successfully pairing your BLU-3DGLST, press the On/Off
switch during viewing to toggle between the following two
modes where preferred: 1) 3D mode, left image first 2) 3D mode,
right image first
Note 1: New pairing connections should take no longer than 20-30 seconds to complete.
If you are experiencing difficulty please power down your BLU-3DGLST glasses and
repeat the pairing process.
Note 2: Your BLU-3DGLSBT glasses can only be paired to one 3D TV at a time. The
pairing process needs
to be repeated each time the glasses are used with a different 3D TV.
Note 3: When the battery is low, the blue indicator light will blink continuously and
should be recharged.
During charging the light will change to red then turn off once charging is complete.
