manualshive.com logo in svg

Laser Technology UltraLyte, User Manual

Share
Download
Laser Technology UltraLyte User Manual Download Page 80

A

PPENDIX 

A: S

ERIAL 

I

NTERFACE 

S

PECIFICATIONS

 

Electronic Copy of LTI’s UltraLyte User’s Manual – 7

th

 Edition June 1998

 

70

 

Speed/Range Data Message Format

 

Speed and range data downloaded in 20/20 
mode has the following general format: 

speed

,

 

range 

<CR><LF>

 

where: 

speed

 

is the speed measurement. Legal values are 
000 to 199, preceded by a minus sign if the 
target was departing when the measurement 
was taken. 

range

 

is the range measurement. Legal values are 
0000.0 to 9999.9, unsigned. 

<CR><LF> 

is a carriage return/line feed. 

Note that this format has no units indicators. The 
values are in the units in effect when the 
measurement was taken. 

If a measurement error occurs, the speed and 
range values are replaced by an error code in 
the form 

E

xx

, where 

xx

 is the error code. See 

“Error Conditions” for the error code values. 

Example Speed/Range Messages 

English units:

 

50,700.0 

Metric Units: 

80,213.4  

 

For Internal Use Only. Not for Distribution.

Summary of Contents for UltraLyte

















































































Reviews:

No comments

Brands by name

Popular brands

Load more brands