LTI TruPulse
360
R User’s Manual
Page 35
Copyright (c) [2017] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part, is strictly prohibited.
Azimuth Measurements
The laser is not active in the Azimuth (AZ) Measurement Mode. Generally, the azimuth is measured
when you press
. However, in the Continuous Target Mode, the azimuth reading appears in the
Main Display and is updated as your aiming point changes as long as you press
.
As a reminder, "d" appears as the left-most character in the Main Display to
indicate that a declination value has been entered.
Height Routine
Height Measurements involve a simple routine that prompts you to take 3 shots to the target: HD,
INC base (or top), and INC top (or base). The TruPulse 360
R uses these results to calculate the
height of the target. Figure #21 shows the three shots required for the Height Routine.
Figure #21
A
= Horizontal Distance
B
= Top Angle
C
= Base Angle
D
= Height
Summary of Contents for TruPulse 360
Page 1: ......
