LTI TruPoint 200h User’s Manual • Section 4 - Settings Menu
Page 29
Copyright (c)[2020] Laser Technology, Inc. All Rights Reserved. Unauthorized duplication, in whole or in part is strictly prohibited.
HUD Brightness
The heads-up-display (HUD) brightness level can be set with 5 settings:
Option 1
:
1.
Long press the Settings
button and use the
and
buttons to highlight the HUD
Brightness icon
, HUD BRIGHT will be displayed in the lower message area.
2.
Press the
button to change and select the brightness level from 1-5.
3.
Press the Left Soft Key
to return to the main measurement screen. This does not select
an option and exits without saving the HUD Brightness setting option. The unit will return to
the last saved option.
4.
Press the Right Soft Key
to accept HUD Brightness setting option and will exit to the
main measurement screen.
Option 2
:
1.
When the unit is the in the main measurement screen, in the vertical orientation, viewing
through the HUD:
2.
Long press the
button (which is now pointing up) then short press the
navigation
button to change the brightness setting. The setting level change in sequence 1 to 5 and cannot
go backwards (i.e changing from 3 to 2).
3.
Press the
button to accept or let the HUD time-out to accept the setting.
**Draft B**
