Please read this manual before you begin!
Failure to follow this manual’s instructions may
result in damage to the Power Base and/or Laser
Pegs®. Not adhering to these instructions will
void the manufacturer’s warranty. Packaging
must be kept because it contains important
information.
To construct with Laser Pegs®, slide two pieces together to form
a connection. Slide each piece on and off smoothly.
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs® Ventures
LLC. 8304 Consumer Ct., Sarasota FL 34240. Contact: [email protected]
Compatible with other construction kits
Allows you to connect to other
construction kits.
Use the Laser Pegs® Square M-M Peg to attach
the Tire Pegs to the Power Block™.
Tire
Axle Peg
Allows you to connect to
both Laser Pegs® and other
construction kits.
MOBILE POWER BLOCK™
www.LaserPegs.com
Connecting Pegs
POWER BLOCK
POWER BLOCK
MOBILE POWER
BLOCK™
Move the Power Switch to
cycle through the Power
Block light settings.
OFF/ON/FLASH
Power
Switch
Laser Pegs®
Connections
Connecting the Laser Pegs® Tire to the Axle Peg
Tire Peg
Laser Pegs® Square M-M Peg
Place Axle Peg
through the Tire
AVOID DAMAGE TO PEG HOLES
WARNING:
CHOKING HAZARD
-
Small parts.
Not for children under 3 yrs.
Do not submerge in water.
All additional model instructions can
be downloaded at www.LaserPegs.com
MODEL INSTRUCTIONS
Construction Compatible
EN71, RoHS COMPLIANT
This product complies to
all safety requirements
of ASTM F 963
WARNING!
Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won’t. When the Laser Pegs® dim, the Laser Pegs®
are not broken, they just need stronger batteries.
You have 2 simple options...
1. Change the batteries.
2. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more Laser Pegs® you connect!
*To avoid short-circuits, keep metal objects and
other unauthorized materials from obstructing
the peg holes.
9100
POWER BLOCK
For Boys And Girls
Ages 5 And Up
LIGHTED
MOBILE POWER BLOCK™ SET
INCLUDES:
• 83 Construction Parts
• 4 Tire Pegs
• 2 Square M-M Pegs
• 1 Mobile Power Block™
Requires 3 AAA Batteries
Batteries NOT
Included
Batteries NOT
Included
Laser Pegs® Parts List
Construction Parts List
8
Any creation you can build
x2
Never connect more than 150 Laser Pegs®
to the Power Block at one time.
Requires 3-AAA Batteries
(Batteries Not Included)
Replacing Batteries
1. Remove Screw.
2. Lift off Battery Compartment Cover.
3. Place three (3) AAA batteries in the correct
position - as displayed inside of the
Power Block.
4. Replace Battery Compartment Cover and
Screw.
5. Move Power Switch setting to
OFF/ON/FLASH.
6. Do not mix old and new batteries.
7. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium,
NiMH) batteries!
8. Exhausted batteries are to be removed
from the power base.
9. Never connect more than 150 Laser Pegs® at
one time!
10. Non-rechargeable batteries are not to be
recharged.
11. Rechargeable batteries are only to be
recharged under adult supervision.
12. Rechargeable batteries are to be removed
from the toy before being recharged.
13. Batteries are to be inserted with the
correct polarity.
14. The supply terminals are not to be short-
circuited.
LIGHT SETTINGS
Allows you to construct
with Laser Pegs®.
Construction Part Connections
The Power Block is a Power Base that allows you to build with Laser Pegs®
and construction parts to build models that light up. It is battery operated.
(BATTERIES NOT INCLUDED.)
OFF - Turns lights OFF
ON - Turns lights ON
FLASH - Makes lights FLASH
Battery
Compartment
Battery
Compartment
Cover
Requires 3-AAA Batteries
SQUARE
M-M PEG
TIRE PEG
x4
Each Laser Peg® is color coded on the circuit board inside
each shape.
Color
Code
x10
x2
x4
x4
x4
x4
x1
x3
x2
x2
x2
x2
x2
x2
x2
x5
x6
x6
x5
x5
x5
x5
Remove the Phillips head screw
with a 4mm screw driver.
Requires 3-AAA Batteries
Screw
Tire Peg
Battery
Compartment
CAR SERIES
