INSTALLATION, OPERATION &
MAINTENANCE DATA SHEET
(EXP-EMG-EXT-42W SERIES COMPACT FLUORESCENT EMERGENCY
FACTORY SEALED LIGHTING FIXTURES)
EXP-EMG-EXT-42W COMPACT FLUORESCENT
EMERGENCY FACTORY SEALED LIGHTING
FIXTURES
CAUTION:
death and property damage. Do not attempt installation until you are familiar with the following procedures. All
installation must comply with the applicable Electrical Code.
Make sure that the circuit is de-energized before starting installation or maintenance.
Verify that the installation is grounded. Failure to ground will create electrical shock hazards, which can cause
serious injury and or death.
Technical information, advice and recommendations contained in these documents is based upon information
that
Larson Electronics
believes to be reliable. All the information and advice contained in these documents is
intended for use only by persons having been trained and possessing the requisite skill and know-how and to
be used by such persons only at their own discretion and risk. The nature of these instructions is informative
only and does not cover all of the details, variations or combinations in which this equipment may be used, its
storage, delivery, installation, check out, safe operation and maintenance. Since conditions of use of the
product are outside of the care, custody and control of
Larson Electronics
, the purchaser should determine the
suitability of the product for his intended use, and assumes all risk and liability whatsoever in connection
therewith.
Page 1 of 5
