Larson Electronics LLC www.LarsonElectronics.com [email protected]
9419 E US HWY 175, Kemp, TX 75143 - P: (800) 369-6671 - F: (903) 498-3364
WAL-LED-HL-X2
Thank you for purchasing the WAL-LED-HL-X2 intrinsically safe dual lamp headlamp. Save these
instructions. Please read these instructions before using your EXP-LED-HL-X2. It includes important
safety and operation information.
CAUTION
DO NOT
use in explosive atmospheres, near flammable liquids, or where explosion proof lamps are
required.
DO NOT
use in the proximity of vehicles or equipment when there is a risk of flammable liquids coming
into contact with the light.
CAUTION:
For light duty use only
WARNING:
Not for use in hazardous locations.
INSTALLING BATTERIES
1.
Unscrew the battery compartment door on the back of the headlamp.
2.
Insert the batteries per the outline inside the battery compartment. Observe the correct polarity
of the batteries.
3.
Close the battery door and fasten the battery compartment door screw.
4.
The headlamp is not ready for use.
