LEDWP-600E-SSB-1227-56K
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
60W Low Profile LED Wall Pack Light w/ Glare Shield
Flood Beam - Stainless Steel U-Bracket Mount
Instruction Manual
Thank you for your purchase of the Larson Electronics
LEDWP-600E-SSB-1227-56K
Light. Please follow
the steps below in order to install, operate and maintain this product.
MOUNTING
Mounting hardware for the LEDWP-600E-SSB consists of a stainless steel mounting trunnion
bracket and stainless steel screws to provide secure mounting and resistance to rust and corrosion.
The mounting assembly provides for 360/180 degrees of rotation and tilt to allow the user to position
the unit as desired once mounted.
WIRING
We strongly encourage a licensed electrician install this product, especially in outdoor locations where
weatherproofing may be required. Universal voltage driver permits operation at
100V - 277V AC, 50 or 60Hz
.
Warning: Check product label for correct input voltage!
Attach supply line wires to the appropriate light
fixture wires as shown in the diagram
Secure each pair with a wire nut according to the
diagram. Utilize a junction box or similar device and
take precautionary steps for weatherproofing all
connections if installed in a location where water may
come in contact with the unit. Ensure the unit is
properly grounded.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE
LEDWP-600E-SSB-1227-56K
MUST BE WIRED IN ACCORDANCE WITH NATIONAL
ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
RISK OF FIRE/ELECTRIC SHOCK –
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
RISK OF PERSONAL INJURY –
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
WARNING:
MAKE SURE POWER IS TURNED
OFF
BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
The LEDWP-600E-SSB from Larson Electronics is a LED Wall Pack Light w/ Stainless Steel
Mounting Bracket that offers high light output from a compact form factor and is designed to provide
a more durable and long lived alternative to halogen and metal halide units. This 60 watt LED light
produces a wide flood beam without the high heat, fragile construction, or high energy costs of
incandescent lighting.
