GLS-PMK
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
3
Golight Stryker Permanent Mount Assembly - Converts Magnetic
Mount Golights to Permanent Mount
Instruction Manual
1.
$VV
emble together a Phillips head screwdriver,
your permanent mount kit / assembly, and a pair of
wire cutters.
2.
Remove the screws that hold the magnetic base to
the Golight.
3.
To fully remove the base you will need to cut the
wire as close to the butt connectors as possible.
Pull the cable out and remove the base.
4.
Pull the cable out from the back of the Golight.
5.
Apply the rubber seal.
6.
Add the two base brackets and replace the screws
securing the brackets in place.
7.
Add the mounting plate and secure with a screw.
8.
Use a pair of butt splices to reconnect wiring as
necessary.
