GLR-FLK-2
Flood Lens Kit Compatible with Golight RadioRay Lights - Removable Flood Lens
Product ID: 2031
Please see last page for supporting documentation for this product(certificates, CAD files & drawings, IES
files, wiring diagrams, etc).
The GLR-FLK-2 is the Golight Radioray flood lens kit. This assembly includes a new
lens ring holder and a snap on/off flood lens. Once installed, this enables the operator
to have a removable "snap on" diffuser lens for the Golight Radioray models. This
includes model numbers starting with GL-7 (i.e. GL-7901), GL-5 (i.e. GL-5149) and GL-2
(i.e. GL-2051).
If you purchase this flood lens kit with a Golight Radioray model on
we will automatically install the flood lens kit for you. If you purchase it separately, then you
will need to install it yourself with the instructions provided.
There are two tabs on each side of the lens holder ring. By pulling those tabs outward, you can
remove the flood lens. Repeat the process in reverse to apply the flood lens. Be careful not
push hard on the lens assembly or you will move the position of the lamp holder assembly in
the rear gear which could limit the range of the upward and downward movement of the lamp.
This diffuser flood lens will shorten and widen the spot beam for wide area illumination of
distances to 100 feet.
1
Larson Electronics LLC
9419 E US HWY 175, Kemp, TX 75143
Phone: 800.369.6671
www.LarsonElectronics.com
Email: [email protected]
Fax: 903.498.3364
