GAU-HB-12L-LED-WP-WCM
Larson Electronics, LLC
Phone: (800) 369-6671
Fax: (903) 498-3364
www.larsonelectronics.com
1
of
2
60W High Bay LED Fixture
100-277V AC - Aluminum - Cold Forged - IP65
Instruction Manual
Thank you for your purchase of the Larson Electronics
GAU-HB-12L-LED-WP-WCM
.
WARNING
WARNING:
READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
CRITICAL SAFETY INSTRUCTIONS:
•
INSTALLATION SHOULD ONLY BE CONDUCTED BY A QUALIFIED ELECTRICIAN IN ACCORDANCE WITH NEC AND ANY
RELEVANT LOCAL BUILDING CODES.
•
RISK OF FIRE OR ELECTRIC SHOCK. FIXTURE INSTALLATION REQUIRES KNOWLEDGE OF
FIXTURE'S
ELECTRICAL
SYSTEMS. IF NOT QUALIFIED, CONTACT A QUALIFIED ELECTRICIAN.
•
BE CERTAIN ELECTRICAL POWER IS OFF BEFORE AND DURING INSTALLATION AND MAINTENANCE.
•
MAKE SURE THE SUPPLY VOLTAGE IS THE SAME AS THE
FIXTURE'S
RATED VOLTAGE.
•
TO PREVENT WIRING DAMAGE OR ABRASION, DO NOT EXPOSE WIRING TO EDGES OF SHEET METAL OR SHARP
OBJECTS. SUITABLE FOR DAMP LOCATIONS.
IMPORTANT
READ CAREFULLY BEFORE INSTALLING THIS FIXTURE. SAVE THESE INSTRUCTIONS FOR FUTURE
REFERENCE. THE
GAU-HB-12L-LED-WP-WCM
MUST BE WIRED IN ACCORDANCE WITH NATIONAL ELECTRICAL
CODE AND ALL APPLICABLE LOCAL CODES. PROPER GROUNDING IS REQUIRED FOR SAFETY.
WE STRONGLY ENCOURAGE ONLY A LICENSED ELECTRICIAN INSTALL, OPERATE AND MAINTAIN THIS
PRODUCT. IF YOU ARE NOT QUALIFIED OR UNFAMILIAR WITH ANY ASPECT OF THIS INSTRUCTION SHEET,
CONSULT AN ELECTRICIAN. THERE ARE NO SERVICEABLE PARTS INSIDE.
WARNING:
MAKE SURE POWER IS TURNED
OFF
BEFORE STARTING THE
INSTALLATION OR PERFORMING ANY MAINTENANCE.
RISK OF FIRE/ELECTRIC SHOCK –
DISCONNECT POWER AT BREAKER BEFORE INSTALLING OR SERVICING.
RISK OF PERSONAL INJURY –
FIXTURE MAY BECOME UNSTABLE OR DAMAGED IF NOT INSTALLED PROPERLY.
RISK OF BURN –
ALLOW FIXTURE TO COOL BEFORE SERVICING.
The GAU-HB-12L-LED-WP-WCM High Bay LED Fixture from Larson Electronics is designed for industrial work sites and
elevated lighting requirements. The 60-watt fixture operates on 100-277V AC and emits 9,000 lumens of white light during use.
Made out of aluminum with an acrylic lens, the unit caters to Hook, Bracket and Pipe mounting configurations.
M
OUNTING
The GAU-HB-12L-LED-WP-WCM features a variety of mounting options: Hook, Bracket and Pipe. For hook
mounting configurations, the LED fixture can hang suspended in the air, via a small eyelet located at the back
of the unit. When secured using a mounting bracket, the configuration offers 180° of rotation. Pipe mounting
configurations are suitable for sturdy support in overhead positions.
HOOK INSTALLATION
1. Make sure the power is disconnected before attempting to install the unit.
2. Screw the circular ring insert tightly into the mounting attachment found on top of the unit.
3. Hang a safety chain on the hook you will be using to secure the unit to the ceiling.
4. Lock the safety chain to the circular ring attachment you connected in Step 2.
5. Finish the wire connection for the unit.
