![background image](http://html1.mh-extra.com/html/larson-electronics/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc/expcmr-ip-poe-4mp-ir-flx-23-jb-3-sfc_user-manual_3745446072.webp)
68
Explosion Proof Network IP Camera User Manual
6.4.2
Configuring Audio Settings
Steps:
1.
Enter the Audio Settings interface
Configuration > Basic Configuration > Video / Audio > Audio
Or
Configuration > Advanced Configuration > Video / Audio > Audio
Figure 6-30 Audio Settings
2.
Configure the following settings.
Note:
Audio settings vary according to different camera models.
Audio Encoding:
G.722.1, G.711 ulaw, G.711alaw, G.726, MP2L2 and PCM are
selectable. For MP2L2, the sampling rate and audio stream bitrate are
configurable; for PCM, the sampling rate can be set.
Audio Input:
MicIn and LineIn are selectable for the connected microphone and
pickup respectively.
Input Volume
: 0-100
Environmental Noise Filter
: Set it as OFF or ON. When the function is enabled,
the noise in the environment can be filtered to some extent.
3.
Click
Save
to save the settings.
6.4.3
Configuring ROI Encoding
Purpose:
ROI (Region of Interest) encoding helps to discriminate the ROI and background
information in video compression, which means, the technology assigns more
encoding resource to the region of interest, thus to increase the quality of the ROI
Summary of Contents for EXPCMR-IP-POE-4MP-IR-FLX.23-JB.3.SFC
Page 8: ...INTENTIONALLY LEFT BLANK PAGE BREAK PAGE BREAK...
Page 56: ...53 Explosion Proof Network IP Camera User Manual Purpose...
Page 147: ...143 Explosion Proof Network IP Camera User Manual Figure 9 3 Overlay Content Settings...
Page 166: ...User Manual of Network Camera 162 Figure A 1 2 Modify Network Parameters...